Compared with the standard 2.5-inch filter element, the large flow filter element can greatly reduce the investment cost in the application fields of ultrafiltration, reverse osmosis pre filtration and other similar high flow filter elements.

The treatment flow of each large flow filter element can reach 70t / h, so the number of filter elements can be reduced and the size of filter shell can be greatly reduced.

HFM series large flow filter element can provide nominal precision filter grade of 0.5, 1, 5 and 10 microns, and the material is polypropylene.

The design of HFM series containers can be used in each large flow filter element. Compared with general type containers, HFM series containers allow larger size filter elements, and can

Reduce usage costs. Horizontal design and centerless construction make changing filter element faster and easier. A single housing can allow a maximum flow of 4750 GPM (1080m3 / h).

Product characteristics

Gradual aperture structure

When filtering water, the flow of a single filter element can reach up to 110m3 / h

Filter system size can be reduced by up to 50%

The flow direction from inside to outside ensures that all impurities are trapped inside the filter element

application area

General purpose: pre filtration of reverse osmosis system, purification of various process water

● general industry: various process fluids, process water, condensate, cooling water, wastewater treatment, etc

Micro electronics industry: Deionized water pre filtration

● food and beverage industry: process water, etc

● chemical / petrochemical industry: various acids, bases, solvents, quench water, brine and other chemicals

● power plant: make-up water, condensate, stator cooling water, etc

◆ technical parameters of filter element:

Filter core performance

Filtering accuracy: 0.1 μ m, 0.5 μ m, 1 μ m, 5 μ m, 10 μ m, 15 μ m, 20 μ m, 40 μ m, 70 μ M

Maximum operating temperature: folding / melt blown polypropylene 82 ℃ folding glass fiber 121 ℃

Maximum working pressure difference (flow from inside to outside): folding / melt blown polypropylene: 3.44bar @ 82 ℃ folding glass fiber: 3.44bar @ 121 ℃

Recommended pressure difference for filter element replacement: 2.5bar @ 20 ℃

大流量臥式過(guò)濾器尺寸圖

立式過(guò)濾器結(jié)構(gòu)尺寸圖

Detailed technical parameters: